Yayınlar
Partikül Malzemeler Laboratuvarları bünyesinde yapılan bilimsel çalışmalar sonucunda Temmuz 2011 itibariyle SCI kapsamına giren dergilerde toplam 116 adet makale ve uluslararası hakemli konferans ve sempozyumlarda sunulmuş toplam 175 adet bildiri yayınlanmıştır. Yayınlanan makalelere yapılan toplam atıf sayısı 694'dür.
Proje çalışmaları veya uluslar arası işbirlikleri sonucunda çıkan ve SCI kapsamına giren makalelerden bazıları şöyledir:
Öveçoğlu M. L., Özkal B. and Suryanarayana C., "A Comparison of Sintering Characteristics of Ball-Milled and Attritor-Milled W-Ni-Fe Heavy Alloy", Journal of Materials Research, 11(7), (1996), 1683-1692.
Öveçoğlu M. L., Suryanarayana C. and Nix W. D, "Identification of Precipitate Phases in a Mechanically Alloyed Rapidly Solidified Al-Fe-Ce Alloy", Metallurgical and Materials and Transactions, 27A (4), (1996), 1033-1041
Öveçoğlu M. L., Aslanoğlu Z. and Özkal B, "Microstructural Characterization of a High Carbon Fe-C Alloy during Attrition Milling and Sintering", The International Journal of Powder Metallurgy, 34(6), (1998), 47-56.
Öveçoğlu M. L., Senkov O. N, Srisukhumbowornchai N. and Froes F. H.,, "Microstructural Evolution of a Nanocrystalline Ti-47Al-3Cr Alloy During Annealing in the α2 + γ Phase Field", Metallurgical and Materials Transactions A, 30A, (1999), 751-761.
Aslanoğlu Z., Karakaş Y., and Öveçoğlu M. L., "Switching Performance of the W-35Ag Electrical Contacts Fabricated by Mechanical Alloying", The International Journal of Powder Metallurgy, 36(8), (2000), 35-43.
Özkal B., Jiang W., Kato S., Yamamoto O. and Nakagawa Z., "Characterization of Carbon-Coated ZnO Composite Powders by Polymer Pyrolysis Method", Journal of the Ceram. Society of Japan 113 [1] 116-119 (2005).
Stanciu S., Bujoreanu L.-G., Özkal B., Öveçoğlu M. L., Sandu A. V., "Study of precipitate formation in Cu-Al-Ni-Mn-Fe shape memory alloys", Journal of Optoelectronics and Advanced Materials, 10(6), (2008), 1365 - 1369.
Ünal N. and Öveçoğlu M. L., Effects of Wet and Dry Milling Conditions on the Properties of Mechanically Alloyed and Sintered W - 1 wt% C and W - 2 wt% B4C - 1 wt% C Composites, Powder Metallurgy, 52(3), (2009), 254-265.
Coşkun S., Özkal B., Tanoğlu M., Öveçoğlu M. L., "Characterization Investigations during Mechanical Alloying and Sintering of W- 20 vol %SiC Composites", Journal of Alloys and Compounds, 492, (2010), 576 - 584.
Genç A., Coşkun S., Öveçoğlu M. L., "Microstructural Characterizations of Ni Activated Sintered W-2wt% TiC Composites Produced via Mechanical Alloying", Journal of Alloys and Compounds, 497, (2010), 80 - 89.
Özkal B., Upadhyaya A., Öveçoğlu M. L., German R. M., "Comparative Properties of 85W - 15Cu Powders Prepared Using Milling and Coating Techniques", Powder Metallurgy, 53(3), 2010, 236 - 243.
Ünal, N., Kern, F., Öveçoğlu, M. L., Gadow, R. "Optimization of Processing Conditions and Characterization Investigations of Ceramic Injection Molded and Sintered ZrO2/WC Composites", Journal of Alloys and Compounds, 509(14),(2011), 4797-4804.
Ağaoğulları D., Balcı Ö., Duman İ., Öveçoğlu M. L., "Synthesis of α- and β-Rhombohedral Boron Powders via Gas Phase Thermal Dissociation of Boron Trichloride by Hydrogen", Metallurgical and Materials Transactions B, 41, (2011), 568-574.
Kaftelen H., Ünlü N., Göller G., Öveçoğlu M. L., Henein H., "Comparative Processing-Structure-Property Studies of Al-Cu Matrix Composites Reinforced with TiC Particulates", Composites : Part A, (2011), 812-824.