electronics box for itu axa rover
electronics enclosure2026
a new electronics box for the 10th generation itu axa rover. the perforated enclosure holds the rover's electronics in two compartments, with cooling fans, side connector panels, two emergency stops and mounts for the mast and gnss antennas. it was prototyped in clear acrylic before the final build.
erc maintenance task test panel
test equipment2026
a practice panel for the maintenance task of the european rover challenge. it carries the kind of switches, breakers, indicator lights and sockets the rover has to operate, with fiducial markers for the cameras, so the team can train the robotic arm before the competition.
improvements on 6 dof arm
robotic arm, gripper2026
new finger and camera designs for naim, the 6 degrees of freedom arm of itu rover. the fingers were redesigned for a better grip on switches and tools, and the camera above them gives the operator a clear view of what the gripper is doing.
autonomy setup
sensors, autonomy2026
a new sensor setup for the rover's autonomous navigation missions. an ouster lidar and zed depth cameras, integrated with imus, sit on a light plate carried by two masts at the front of the chassis, giving the rover a clear view ahead.
raman spectroscopy
spectroscopy2025
a compact raman spectrometer for the rover's science system. the optics, mirror mounts and detector board sit on a single base plate, so the beam path stays aligned while the rover moves.
polarized spectroscopy
spectroscopy2026
a polarized spectroscopy setup designed for itu bioramp laboratories. the light source, lens tube, mirrors and detector are fixed to one plate to keep the beam path short and repeatable.
unmanned aerial vehicle for erc
uav2026
a quadcopter built with itu rover team for the european rover challenge. it was tested on a bench stand and outdoors before going to the competition.