A46. Dalgic, D.K., M.A.N. Hendriks, A. Ilki, W. Broere,   “A two-stage analysis approach for the assessment of the settlement response of the pre-damaged historic Hoca Pasha Mosque”, International Journal of Architectural Heritage, accepted April, 2018.

A45. Demir, U., Y. Sahinkaya, M. Ispir, A. Ilki, “Assessment of axial behavior of circular HPFRCC members externally confined with FRP sheets”, Polymers, 10(2), Article 138, 2018.

A44. Dalgic, D.K., M.A.N. Hendriks, A Ilki, “Building response to tunnelling- and excavation-induced ground movements: using transfer functions to review the limiting tensile strain method”, Structure and Infrastructure Engineering, 14(6), 766-779, 2018.

A43. Bas, S., N.M. Apaydin, A. Ilki, N. Catbas, “Structural health monitoring system (SHMs) of the long-span bridges in Turkey”, Structure and Infrastructure Engineering, 14(4), 425-444, 2018.

A42. Comert, M., C. Demir, A.O. Ates, K. Orakcal, and A. Ilki, “Seismic performance of three-storey full-scale sub-standard reinforced concrete buildings” Bulletin of Earthquake Engineering, 15(8), 3293-3320, 2017.

A41. Goksu, C., P. Inci, U. Demir, U. Yazgan, and A. Ilki, “Field testing of substandard RC buildings through forced vibration test” Bulletin of Earthquake Engineering, 15(8), 3245-3263, 2017.

A40. Mezrea, P.E., I.A. Yilmaz, E. Binbir, M. Ispir, I.E. Bal, and A. Ilki, “External jacketing of unreinforced historical masonry piers with open-grid basalt reinforced mortar” ASCE, Journal of Composites for Construction, 21(3), Article Number: 04016110, 2017.

A39. Ghatte, H.F., M. Comert, C. Demir, and A. Ilki, “Evaluation of FRP confinement models for substandard rectangular RC columns based on full-scale reversed cylic lateral loading tests in strong and weak directions” Polymers, 8(9), doi:10.3390/polym8090323, 2016.

A38. Cavunt, Y.S., D. Cavunt, and A. Ilki, “Indoor and outdoor pullout tests for retrofit anchors in low strength concrete” Computers and Concrete, 18(5), 951-968, 2016.

A37. Kaya, E., C. Kutan, S. Sheikh, and A. Ilki, “Flexural retrofit of support regions of reinforced concrete beams with anchored FRP ropes using NSM and ETS methods under reversed cyclic loading,” ASCE, Journal of Composites for Construction, 21(1), Article Number: 04016072, 2017.

A36. Goksu, C., and A. Ilki, “Seismic behavior of reinforced concrete columns with corroded deformed reinforcing bars,” ACI Structural Journal, 113(5), 1053-1064, 2016.

A35. Akbas, T.T., O.C. Celik, C. Yalcin, and A. Ilki, “Monotonic and cyclic bond behavior of deformed CFRP bars in high strength concrete,” Polymers, 8(6), June 2016.

A34. Seyhan, E.C., C. Goksu, A. Uzunhasanoglu, and A. Ilki, “Seismic behavior of substandard RC columns retrofitted with embedded AFRP reinforcement,” Polymers, 7(12), 2535-2557, 2015.

A33. Dalgic, K., M. Ispir, A. Ilki “Cyclic and monotonic compression behavior of CFRP jacketed damaged non-circular concrete prisms,” ASCE, Journal of Composites for Construction, 20(1), Article Number: 04015040, 2016.

A32. Goksu, C., P. Inci, and A. Ilki, "The effect of corrosion on bond mechanism between extremely low strength concrete and plain reinforcing bars," ASCE J. Perf. Const. Facilities, 30(3), Article number 04015055, 2016.

A31. Demir, C., K. Darilmaz, and A. Ilki, Cyclic stress-strain relationships of FRP confined concrete members, The Arabian Journal for Science and Engineering, 40(2), 363-379, 2015.

A30. Demir, C., A. Kucukkapili, D. Doyrangul, and A. Ilki, The effects of loading rate and duration on the axial behavior of low-strength and medium-strength noncircular concrete members confined by fiber-reinforced polymer sheets, Polymers, 6(6), 1685-1704, 2014.

A29. Yuksel, E., F. Karadogan, E. Bal, A. Ilki, A. Bal, P. Inci, Seismic behavior of two exterior beam-column connections made of normal-strength concrete developed for precast construction, Engineering Structures, 99, 157-172, 2015.

A28. Demir, C., and A. Ilki, Characterization of the materials used in the multi-leaf masonry walls of monumental structures in Istanbul, Turkey, Construction and Building Materials, 64, 398-413, 2014.

A27. Ilki, A., M. Comert, C. Demir, K. Orakcal, D. Ulugtekin, M. Tapan and N. Kumbasar, Performance based rapid seismic assessment method (PERA) for reinforced concrete frame buildings, Advances in Structural Engineering, 17(3), 439-459, 2014.

A26. Goksu, C., H. Yilmaz, S.R. Chowdhury, K. Orakcal, and A. Ilki, The effect of lap splice length on the cyclic lateral load behavior of RC members with low-strength concrete and plain bars, Advances in Structural Engineering, 17(5), 639-658,2014.

A25. Garcia, R., I. Hajirasouliha, M. Guadagnini, Y. Helal, Y. Jemaa, K. Pilakoutas, P. Mongabure, C. Chrysostomou, N. Kyriakides, A. Ilki, N. Taranu, M.A. Ciupala, L Torres and M. Saiidi, “Full-scale shaking table tests on a sub-standard RC building repaired and strengthened with post-tensioned metal straps, Journal of Earthquake Engineering, 18(2), 187-213, 2014.

A24. Bedirhanoglu, I., A. Ilki, and N. Kumbasar, “Precast fiber reinforced cementitious composites for seismic retrofit of deficient rc joints - a pilot study,” Engineering Structures, 52, 192-206, 2013.

A23. Tapan, M., M. Comert, C. Demir, Y. Sayan, K. Orakcal, and A. Ilki, “Failures of Structures during the October 23, 2011 Tabanlı (Van) and November 9, 2011 Edremit (Van) Earthquakes in Turkey, Engineering Failure Analysis, 34, 606-628, 2013.

A22. Inci, P., C. Goksu, A. Ilki, and N. Kumbasar, “Effects of Reinforcement Corrosion on the Performance of RC Frame Buildings Subjected to Seismic Actions,” ASCE J. Perf. Const. Facilities, 27(6), 683-696, 2013.

A21. Koroglu, M.A., M. Ceylan, M.H. Arslan, and A. Ilki, “Estimation of Flexural Capacity of Quadrilateral FRP-Confined RC Columns using Combined Artifical Neural Network,” Engineering Structures, 42, 23-32, 2012.

A20. Koksal, F., A. Ilki, and M.A. Tasdemir, “Optimum Mix Design of Steel Fiber Reinforced Concrete Plates,” Arabian Journal of Science and Engineering, (accepted in 2012).

A19. Ispir, M., and A. Ilki, “Behavior of Historical Unreinforced Brick Masonry Walls under Monotonic and Cyclic Compression,” Arabian Journal of Science and Engineering, 38(8), 1993-2007, 2013.

A18. Goksu, C., A. Polat, A. Ilki “An Attempt for Seismic Retrofit of Existing Sub- Standard RC Members under Reversed Cyclic Flexural Effects,” ASCE, Journal of Composites for Construction, 16(3), 286-299, 2012.

A17. Ilki, A. and Z. Celep, “Earthquakes, Existing Buildings, and Seismic Design Codes in Turkey,” Arabian Journal of Science and Engineering, 37(2), 365-380, 2012.

A16. Ozsayin, B., E. Yilmaz, M. Ispir, H. Ozkaynak, E. Yuksel, and A. Ilki, “Characteristics of CFRP Retrofitted Hollow Brick Infill Walls of Reinforced Concrete Frames,” Construction and Building Materials, 25(10), 4017-4024, 2011.

A15. Celep, Z., A. Erken, B. Taskin and A. Ilki, “Failures of masonry and concrete buildings during the March 8, 2010 Kovancilar and Palu (Elazig) Earthquakes in Turkey,” Engineering Failure Analysis, 18, 868-889. 2011.

A14. Ilki, A., I. Bedirhanoglu and N. Kumbasar, “Behavior of FRP Retrofitted Joints Built with Plain Bars and Low-Strength Concrete,” ASCE J. Comp. Const., 15(3), 312-326, 2011.

A13. Gurbuz, T., and A. Ilki, "Pullout Performance of Fully and Partially Bonded Retrofit Anchors in Low Strength Concrete," ACI Structural J., 108(1), 61-70, 2011.

A12. Comert, M., and A. Ilki, The Explosion Performance of a Ball Powder Production Facility, ASCE J. Perf. Const. Facilities, 24(4), 326-336, 2010.

A11. Ispir, M., C. Demir, A. Ilki and N. Kumbasar, "Material Characterization of the Historical Unreinforced Masonry Akaretler Row Houses in Istanbul," ASCE J. Mat. Civ. Eng., 22(7), 702-713, 2010.

A10. Bedirhanoglu, I., A. Ilki, S. Pujol, N. Kumbasar, “Behavior of Deficient Joints with Plain Bars and Low-strength Concrete,” ACI Structural J., 107(3), 300-310, 2010.

A9. Demir, C., K. Kolcu, A. Ilki, “Effects of Loading Rate and Duration on Axial Behavior of Concrete Confined by Fiber Reinforced Polymer Sheets,” ASCE J. Comp. Const., 14(2), 146-151, 2010.

A8. Ilki, A., C. Demir, I. Bedirhanoglu, N. Kumbasar, “Seismic Retrofit of Brittle and Low Strength RC Columns using Fiber Reinforced Polymer and Cementitious Composites,” Advances in Structural Engineering, 12(3), 325-347, 2009.

A7. Eraybar, K., K. Okazaki, A. Ilki, "An Exploratory Study on the Perception of Seismic Risk and Mitigation in Two Districts of Istanbul", Disasters, 34(1), 71-92, (2010).

A6. Ilki, A., O. Peker, E. Karamuk, C. Demir and N. Kumbasar, “FRP Retrofit of Low and Medium Strength Circular and Rectangular Reinforced Concrete Columns,” ASCE J. Mat. Civ. Eng., 20(2), 169-188, (2008).

A5. İlki, A., N. Kumbasar ve V. Koç, “Low Strength Concrete Members Externally Confined with FRP Sheets,” Int. J. Str. Eng. Mech., 18(2), 167-194 (2004).

A4. İlki, A., N. Kumbasar, P. Özdemir ve T. Fukuta, “A Trilinear Stress-strain Model for Confined Concrete,” Int. J. Str. Eng. Mech., 18(5), 541-563, (2004).

A3. İlki, A. ve N. Kumbasar, “Compressive Behaviour of Carbon Fiber Composite Jacketed Concrete with Circular and Non-circular Cross-sections,” J. Earthquake Engineering, 7(3), 381-406 (2003).

A2. İlki, A., N. Kumbasar ve V. Koç, “Low and Medium Strength Concrete Members Confined by Fiber Reinforced Polymer Jackets,” ARI Bulletin of the Technical University of Istanbul, 53(1), 118-123 (2003).

A1. İlki, A. ve N. Kumbasar, “Behavior of Damaged and Undamaged Concrete Strengthened by Carbon Fiber Composite Sheets,” Int. J. Str. Eng. Mech., 13(1) 75-90 (2002).